Online Training
SOLVENT Cements ONLINE Course
If you have already prepared to start the course, you may Register Now!. Otherwise, read the text below.
Before you begin, you’ll need two documents: the IPEX Solvent Cementing Guide, and the Solvent Cementing Catalogue.
To obtain these documents, you can do one of the following:
You will need to consult these documents during the session, and when you take the test.
The course will take you approximately 30 – 45 minutes to complete. At the end is a short test. Seven correct answers out of nine will give you a passing grade and a certificate from IPEX.
Pop quizzes are interspersed throughout the course — these do not count toward your final grade, but are good practice for the final test. You must complete each quiz before proceeding to the next section.
Technical Requirements: To run this course, you need Macromedia FLASH Player v. 4 installed on your computer. FLASH Player is a free plug-in that you can download from Macromedia’s web site.
Once you have the solvent cementing documents, You can Register Now!
Good luck!
This course was developed to aid the installer in the proper techniques needed for the joining of plastic pipe and fittings. The suggestions and data in this course are based on information we believe to be reliable. Installers should verify for themselves that they can make satisfactory joints under varying conditions. Also, it is recommended that installers receive personal instruction from trained instructors or competent, experienced installers. Contact us or your supplier for additional information or instruction.
If you have any questions on the material in this course or need further assistance, please contact marketing@ipexinc.com.
|
